We conduct every project with honesty, accountability, and respect. From the first conversation through final cleanup, we communicate clearly, protect our customers' property, and make decisions that earn trust, especially when no one is watching.
Mobile sandblasting · Miami, Florida
We restore.
We protect.
We deliver.
Professional mobile abrasive blasting and surface preparation for the equipment, structures, vehicles, and vessels that keep Florida moving.
Mobile serviceAcross Florida
Our core values
The standard behind every job.
We take pride in every surface we prepare and every finished detail. Our work is guided by careful planning, professional equipment, and disciplined execution so each asset is properly prepared for the next stage.
Our customers can count on us to arrive prepared, communicate throughout the project, and follow through on our commitments. We respect schedules, job-site requirements, and the responsibility that comes with being trusted with valuable assets.
We continually raise our standard through hands-on experience, thoughtful problem-solving, and attention to safety. Every project is an opportunity to improve our craft and deliver work that represents the Fisher name with confidence.
We treat customers, partners, and communities with professionalism and care. By listening first, responding clearly, and tailoring our approach to each project, we create a service experience that is capable, respectful, and easy to trust.
What we do
Superior surface prep.
Delivered on-site.
Fisher Abrasive Solutions removes failed coatings, corrosion, and surface contamination with professional mobile blasting equipment brought directly to your site. We prepare steel, equipment, vehicles, vessels, and structures for repair or refinishing with a focus on safety, consistency, and clear communication. The result is a clean, dependable surface ready for the next stage of protection.
Restore
Coating removal
Failed paint, powder coat, epoxy, and other bonded finishes can hide damage and prevent new systems from performing. Fisher selects the appropriate abrasive, pressure, and technique for the substrate, producing a clean, consistent foundation for inspection, repair, restoration, or refinishing.
- Paint, epoxy, and stubborn coatings
- Equipment, steel, and specialty assets
Project outcomeA clean foundation for what comes next
Protect
Corrosion mitigation
Rust, scale, oxidation, and surface contamination continue to spread when they are covered instead of properly removed. Our process exposes the true condition of the asset and prepares sound material for primers, protective coatings, and repairs designed to extend service life.
- Rust, scale, and oxidation removal
- Asset preservation and recoating
Project outcomePrepared for lasting protection
Prepare
Surface preparation
Coating performance begins with the right level of cleanliness and surface profile. We prepare each substrate around its condition, material, access, and next coating system, helping repairs and finishes achieve more dependable adhesion and a professional, longer-lasting result.
- Controlled surface cleanliness and profile
- Repair, restoration, and recoating
Project outcomeA surface built for better adhesion
Mobile service
Mobile abrasive blasting
Professional abrasive blasting comes directly to your facility, marina, shop, property, or job site. Our organized mobile setup reduces transportation challenges and downtime while supporting safe work-area preparation, clear communication, and efficient project execution from arrival through cleanup.
- On-site convenience across Florida
- Commercial, marine, and specialty projects
Project outcomeProfessional service where you need it
Mobile service · We come to you
A professional presence.
At every job.
Fisher Abrasive Solutions arrives with an organized mobile system designed to keep projects moving from setup through cleanup. Our enclosed branded trailer protects the equipment and abrasive media required for the job while helping us maintain a professional, prepared presence on site. Customers receive dependable service, clear communication, and experienced surface preparation brought directly to their location.
Industries served
Industrial
We prepare structural steel, tanks, production equipment, machinery, and fabricated components for inspection, repair, or new protective coatings. Our mobile approach helps facilities address coating failure, corrosion, and heavy surface buildup while keeping project coordination focused and efficient.
Marine
We restore clean, properly profiled surfaces on boats, trailers, marine components, docks, and waterfront equipment. Controlled abrasive blasting removes deteriorated coatings, oxidation, and marine buildup so the asset is ready for repair, refinishing, or corrosion protection.
Commercial
We support contractors, property teams, and facility managers with surface preparation for buildings, machinery, metal features, and renovation projects. Each job is planned around site access, surrounding areas, scheduling requirements, and the finish needed for the next phase of work.
Automotive
We strip coatings and corrosion from frames, parts, restoration projects, and specialty vehicles with attention to the condition and geometry of each component. The result is a clean foundation that allows hidden damage to be evaluated and prepares the surface for repair, primer, or refinishing.
Residential
We renew metalwork, masonry, outdoor features, gates, railings, and restoration pieces at the customer’s location. Our process removes failing finishes and surface contamination to create a cleaner, more consistent base for repairs, protective coatings, or a refreshed appearance.
How it works
Built for efficient
project execution.
A clear process keeps the work safe, the schedule moving, and the finished surface ready for its next stage.
The Fisher process
From compromised
to protected.
Professional surface preparation turns worn, corroded assets into clean foundations for durable protective finishes.
Assess
We begin by reviewing the asset, existing coating, surface condition, access, surrounding work area, and the finish required for the next stage. This evaluation helps us select the appropriate abrasive, pressure, containment approach, and project plan before equipment is mobilized.
Prepare
Before blasting begins, we organize the work area, protect nearby surfaces, establish containment where needed, and confirm equipment and safety controls. Clear coordination with the customer helps the job start efficiently while supporting a clean, controlled, and professional site.
Blast
The surface is blasted with the media and technique selected for the material, coating, and required profile. We work methodically to remove corrosion, failed finishes, and contamination while monitoring progress so the prepared surface meets the needs of repair, primer, or protective coating.
Deliver
After blasting, we review the prepared surface, complete job-site cleanup, and communicate any visible conditions uncovered during the work. The customer receives a clean, consistent asset that is ready for inspection, repair, coating, or the next scheduled phase.
Our mission
Quality, integrity, and professionalism.
Our mission is to deliver dependable mobile abrasive blasting and surface preparation with quality, integrity, and professionalism at every stage. We plan each project around the asset, job-site conditions, safety requirements, and finish needed for the next phase, then execute with disciplined attention to containment, communication, cleanup, and surface quality. By bringing experienced service directly to the customer, we help restore valuable equipment, protect long-term performance, and create a clean foundation for durable results.
We restore. We protect. We deliver.Our vision
Florida’s most trusted mobile blasting company.
Our vision is to become Florida’s most trusted mobile abrasive blasting and surface-preparation company, recognized for consistent workmanship, reliable service, and honest relationships. We aim to grow responsibly by investing in skilled people, professional equipment, strong operating systems, and a customer-first culture that can support projects of increasing size and complexity. As we expand across Florida and beyond, the Fisher name will stand for accountability, technical capability, and work delivered with pride.
Meet the founder
Experience that
shows up on-site.
Brenton Fisher brings more than eight years of professional mobile abrasive blasting experience. He combines hands-on technical knowledge with a calm, straightforward approach that helps customers understand the work, their options, and what to expect on site.
As founder, owner, and head technician, Brenton remains directly involved in project planning and field execution. He takes time to listen, inspect the asset, explain the recommended process in plain language, and answer questions without pressure. Customers work with an accessible decision-maker who values honest guidance, clear communication, and respect for their property, schedule, and goals.
His experience with blasting systems, abrasive media, containment, equipment maintenance, and job-site coordination gives him the confidence to adapt the process to each surface and project condition. Brenton’s standard is simple: arrive prepared, work safely and methodically, communicate throughout the job, and deliver a properly prepared surface that earns long-term trust.
8+Years of professional experience
DirectOwner communication from quote through completion
On-siteHands-on technical leadership
Experience & expertise
Built from
the field up.
Blasting applications
Hands-on experience selecting and operating abrasive processes for different substrates, coatings, surface conditions, and finish requirements.
- Glass bead and soda blasting for controlled cleaning
- Sand and abrasive media blasting for heavy coating and corrosion removal
- Surface preparation matched to the substrate and required profile
- Complex geometries and hard-to-reach components
- Large industrial assets and fabricated steel projects
Project execution
Practical field leadership across assessment, setup, containment, blasting operations, equipment care, cleanup, and final project coordination.
- Job-site assessment and blast system setup
- Containment installation and surrounding-area protection
- Media management, work-area organization, and cleanup
- Equipment inspection, maintenance, and field repairs
- Workflow coordination and project supervision
- Resolving changing site and surface conditions
Industry strengths
A balanced approach that combines technical operations, safety awareness, disciplined planning, and customer-focused communication.
- Equipment knowledge and process selection
- Safety, containment, and quality-control discipline
- Problem-solving and adaptability on every job
- Clear customer and contractor communication
- Project planning and workflow coordination
- Training and leadership for future team members
Ready for the field
A brand built to earn trust.
From the mobile fleet to professional field apparel, every touchpoint reinforces the same promise: quality work, reliable communication, and service that delivers.
Planning a project?
Protect the asset.
Prepare for what is next.
Do not let corrosion, failed coatings, or surface buildup keep putting your asset at risk. Call or email Fisher with the asset, location, current condition, and project timeline, and we will give you clear guidance on the right surface-preparation approach. Start the conversation today so your equipment, structure, vehicle, or vessel can be properly prepared for repair, coating, and dependable service.